My speed is burning..

bordello

Buying through escrow
New seller
Joined
Mar 25, 2024
Messages
9
Reaction score
3
Points
3
Hello i need some help.
Ive made a batch speed from oil with bio Ethanol i put down to PH 6,9 and the ive put it straight in to the freezer for 10h. I wanted to test something and took something on a plate. I wanted to dry it faster so i toom a light and it lit up the hole plate haha what was my fault. Should i leave it in fresh wir for a few hours to evaporate the Ethanol more ?
 

OTC_HomeChemist

Don't buy from me
New Member
Joined
Apr 30, 2024
Messages
17
Reaction score
4
Points
3
First of all Ethanol is not a good choice because of rather low vapour pressure the drying process will be pretty slow. The usual commercial denaturized Bio Ethanol will also contain about 3-4% of water as well as some denaturizing agents (so as to make the Ethanol not suitable for drinking) and this will usually be 1% methyl ethyl ketone/ 2-butanone and sometimes a really tiny amount of bitrex.

The water is not really an issue but will also delay the drying process at least until completely dry. The MEK can potentially react with the Amphetamine base (imine formation) but since there is also water present it would be hydrolyzed anyway so No problem Here...

The bitrex however will not evaporate and even small amounts left in the final product will alter the taste.

Apart from that the drying process can be sped up by heating to 50 or even 80 degrees celsius without any decomposition of the amphetamine sulphate. If adjusted to a Ph of 6,9 the dry end product should not produce a strong burning Sensation.
 

blockchain

Don't buy from me
Member
Joined
Apr 2, 2024
Messages
26
Reaction score
13
Points
3
Good way to dry it is oven/heatplate. Just use temp meter so you dont over heat it. Ethanol boiling temp is 80C so 60-80C would dry it very fast
 

bordello

Buying through escrow
New seller
Joined
Mar 25, 2024
Messages
9
Reaction score
3
Points
3
Good way to dry it is oven/heatplate. Just use temp meter so you dont over heat it. Ethanol boiling temp is 80C so 60-80C would dry it very fast
blockchainDoes this not affect the speed quality
 

blockchain

Don't buy from me
Member
Joined
Apr 2, 2024
Messages
26
Reaction score
13
Points
3
Does this not affect the speed quality
bordelloAmphetamine boiling point is 203C and meltint point is 146C so anything under that won't effect it. 60-80C is perfect since etanol boils at 80C. it won't effect The quality of the speed but ethanol will be gone in minutes
 
  • Free product samples

    Testing products from new vendors and manufacturers.

    Get free samples for testing now!

  • Always stay in touch with BB forum. Element/Matrix.

    Connect notifications to always stay in touch with the forum!

    Connect

  • The BB Forum team is looking for cooperation:

    • Traffic arbitrage specialists
    • Spammers
    • Advertising agencies
    • Bloggers/Vloggers
    • TOR sites directories
    • Creative people who can create viral content
    • Administrators of Telegram Channels and Groups

      We will pay more for your traffic than our competitors! $0.1 per visitor!!!If you are interested in, write to the administrator.
Top